CONNECTIONS
1) ELECTRICAL CONNECTIONS2.2 Non-polarized plugs (e.g. 2 pin with side
?Warning - this appliance must be earth contact)
earthed?The wire which is coloured GREEN AND
YELLOW must be connected to the earth contact.
This appliance is normally supplied with a The other two wires should be connected to the
mains lead having a plug fitted in the factory
which has been checked for correct earth two pins, irrespective of colour.
continuity.
3) FUSE REPLACEMENT
If the fitted plug is not suitable for your socket
outlet, or if the machin?s mains leead is not If the mains lead of this appliance is fitted with
fitted with a plug, you should fit a suitaba BS 136le new, 3A 13 amp fused plug, replace the
good quality plug by following the instructiofuse only with an A.S.T.A. approvens in d type
(2) below.conforming to BS 1362 and proceed as follows:
Any unsuitable plug should be cut off and
disposed of in order to avoid a possible shock
hazard should it be inserted into a socket.
2) CONNECTION TO A REWIRABLE
PLUG - to be carried out only by a
qualified electrician
The wires in the mains lead are coloured in
accordance with the following code:
BLUE - ?NEUTRAL ? (?N?)
BROWN - ?LIVE? (?L?)
GREEN AND YELLOW - ?EARTH ? (?E?)
To fit a new plug, proceed as follows:
2.1 Polarized Plugs (e.g. 3 pin, 13 amp plug 1. Remove the fuse cover (A) and the fuse (B).
conforming to BS 1363A)
a. The GREEN AND YELLOW wire must be 2. Fit the replacement 13 A fuse into the fuse
cover.
connected to the terminal in the plug which
is marked with the letter ?E? or by the Earth 3. Refit both into the plug.
symbol or coloured yellow or green anFor all other tyd pes of plug, the supply socket
yellow.should be protected by a 16 A fuse or circuit
b. The BLUE wire must be connected to the breaker at the distribution board
terminal which is marked with th?N? e letter
or coloured black.
c. The BROWN wire must be connected to the
terminal which is marked with the?L? letter
or coloured red.
19 |